Historical trends of trace metals in a sediment core from a contaminated tidal salt marsh in San Francisco Bay

Sedimentation of metals preserves historical records of contaminant input from local and regional sources, and measurement of metals in sediment cores can provide information for reconstruction of historical changes in regional water and sediment quality. Sediment core was collected from Stege Marsh located in central San Francisco Bay (California, USA) to investigate the historical input of trace metals. Aluminum-normalized enrichment factors indicate that inputs from anthropogenic sources were predominant over natural input for Ag, Cu, Pb, and Zn. Among these, lead was the most anthropogenically impacted metal with enrichment factors ranging from 32 to 108. Depth profiles and coefficients of variation show that As, Cd, and Se were also influenced by anthropogenic input. The levels of these anthropogenically impacted metals decline gradually towards the surface due to regulation of the use of leaded gasoline, municipal and industrial wastewater discharge control, and closure of point sources on the upland of Stege Marsh. Although trace metal contamination is expected to be continuously declining, the rates of decline have slowed down. For lead, it is estimated to take 44, 82, and 153 years to decrease to probable effects level (112 μg/g), the San Francisco Bay ambient surface sediment level (43.2 μg/g), and the local baseline levels (5 μg/g), respectively. Some metals in surface sediments (0–6 cm) are still higher than sediment quality guidelines such as the probable effects level. To further facilitate the recovery of sediment quality, more efficient management plans need to be developed and implemented to control trace metals from non-point sources such as stormwater runoff.     

Factors affecting the foraging behaviour of the European shag: implications for seabird tracking studies

Seabird tracking has become an ever more popular tool to aid environmental procedures such as the designation of marine protected areas and environmental impact assessments. However, samples used are usually small and little consideration is given to experimental design and sampling protocol. European shags Phalacrocorax aristotelis were tracked using GPS technology over three breeding seasons and the following foraging trip characteristics: trip duration, trip distance, maximum distance travelled from the colony, size of area used and direction travelled from colony were determined for each foraging trip. The effect of sex, year of study, breeding site, number and age of chicks and the timing of tracking on foraging behaviour were investigated using a General Estimation Equation model. A range of sampling scenarios reflecting likely field sampling were also tested to compare how foraging behaviour differed depending on composition of the sample of birds tracked. Trip distance, trip duration, maximum distance travelled and size of area used were all significantly affected by the breeding site, and the number of chicks a tracked adult was raising. The effect of sex was also seen when examining trip distance, trip duration and the maximum distance travelled. The direction travelled on a foraging trip was also significantly affected by breeding site. This study highlights the importance of sampling regime and the influence that year, sex, age, number of chicks and breeding site can have on the foraging trip characteristics for this coastal feeding seabird. Given the logistical and financial constraints in tracking large numbers of individuals, this study identifies the need for researchers to consider the composition of their study sample to ensure any identified foraging areas are as representative as possible of the whole colony’s foraging area.     

Relating characteristics of global biodiversity targets to reported progress

To inform governmental discussions on the nature of a revised Strategic Plan for Biodiversity of the Convention on Biological Diversity (CBD), we reviewed the relevant literature and assessed the framing of the 20 Aichi Biodiversity Targets in the current strategic plan. We asked international experts from nongovernmental organizations, academia, government agencies, international organizations, research institutes, and the CBD to score the Aichi Targets and their constituent elements against a set of specific, measurable, ambitious, realistic, unambiguous, scalable, and comprehensive criteria (SMART based, excluding time bound because all targets are bound to 2015 or 2020). We then investigated the relationship between these expert scores and reported progress toward the target elements by using the findings from 2 global progress assessments (Global Biodiversity Outlook and the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services). We analyzed the data with ordinal logistic regressions. We found significant positive relationships (p < 0.05) between progress and the extent to which the target elements were perceived to be measurable, realistic, unambiguous, and scalable. There was some evidence of a relationship between progress and specificity of the target elements, but no relationship between progress and ambition. We are the first to show associations between progress and the extent to which the Aichi Targets meet certain SMART criteria. As negotiations around the post-2020 biodiversity framework proceed, decision makers should strive to ensure that new or revised targets are effectively structured and clearly worded to allow the translation of targets into actionable policies that can be successfully implemented nationally, regionally, and globally.     

Artificial lightweight aggregates as utilization for future ashes - A case study

In the future, more electricity in the Netherlands will be produced using coal with co-combustion. Due to this, the generated annual ash volume will increase and the chemical composition will be influenced. One of the options for utilization if present markets are saturated and for use of fly ashes with different compositions, is as raw material for lightweight aggregates. This was selected as one of the best utilizations options regarding potential ash volume to be applied, environmental aspects and status of technology. Because of this, a study has been performed to assess the potential utilization of fly ash for the production of lightweight aggregate. Lightweight aggregate has been produced in a laboratory scale rotary kiln. The raw material consisted of class F fly ash with high free lime content. An addition of 8% clay was necessary to get green pellets with sufficient green strength. The basic properties of the produced lightweight aggregate and its behaviour in concrete have been investigated. The concrete has a good compressive strength and its leaching behaviour meets the most stringent requirements of Dutch environmental regulations. The carbon foot print of concrete will be negatively influenced if only the concrete itself is taken into account, but the reduction of the volume weight has advantages regarding design, transport emissions and isolation properties which may counteract this. In the Dutch situation the operational costs are higher than expected potential selling price for the LWA, which implies that the gate fee for the fly ash is negative.     

Inherent conflicts at the coast

Because choice is conflict, decision-making is necessarily about conflict resolution. Choices are necessary because the options are mutually exclusive but the nature of this inherent conflict varies. Typically, these conflicts are multidimensional. In coasal zones, the complex interactions between systems makes decision-making particularly complex; in particular, environmental interests are themselves frequently in conflict. In making a choice, it is important to determine why that choice is necessary in the first place. There are further conflicts about the objectives to be satisfied by the decision process; between the determination of the best outcome and the best decision process. Social scientists centre upon the requirement for a fair decision process rather than upon seeking an optimum outcome. Unlike physical scientists who seek more and better information, social scientists focus upon the development and maintenance of institutions.     

Multilayer thin film silicon solar cells

New multilayer solar cells combine three innovations to produce a unique device structure which allows high efficiency cells to be designed on low quality material. The first innovation is the use of the multilayer structure itself, which provides the tolerance to low quality material. The second is the use of the well-proven buried contact technology. The third innovation is a simple technique for connecting cells in series which relies on having grooves of opposite polarity either overlapping or in close proximity to each other. These three innovations combine to produce a manufacturing approach with a small number of processing steps able to produce a product with a high energy conversion efficiency using low quality starting material. The unit of production is a large module of approximately 1 m² in area rather than the smaller 100 cm² cells which are the present commercial norm .     

改变生产与消费方式:已经取得的进展与存在的挑战

在贫困不断减少以及经济持续增长的情况下,生产与消费方式必然会由不可持续型向可持续型转变.由于这会使人们显著改变思想观念与行为方式,因此需要解决生产者与消费者责任问题.清洁生产是企业社会责任的核心.目前UNEP已收到多项建议,其中包括发展清洁生产与可持续消费指标以及增进多方合作性举措.     

Measuring differences between overlapping but unpaired spatial surveys using a geographic information system

To compare the results from two overlapping but unpaired synoptic surveys, a method using a geographic information system is proposed. The new method uses a GIS to create (i) minimum convex polygons (MCP) enclosing each set of survey data and (ii) Voronoi tesselations assigning area weights to each datum. The pairs of MCP and Voronoi maps are overlaid to produce a mosaic of polygons each with one datum assigned from each survey. The differences between the pairs weighted by the polygon areas provides the basis for statistical testing. Area-weighted means and variances of paired differences are computed and a z-statistic measures the significance of differences for the whole intersection area. A cross-product autocorrelation statistic provides an assessment of the spatial distribution of differences. Alternate, conventional methods are compared with the new method: analysis of variance (ANOVA), analysis of covariance (ANCOVA), and contour overlays. The four methods were applied to the comparison of two macrobenthic surveys conducted in Lake Erie. Measures for five different taxa were examined. The ANOVA and ANCOVA methods found many significant differences between surveys. Both methods were judged inappropriate as sampling data are not expected to be drawn from normally-distributed populations in spatial surveys. Differences between surveys were detected but were difficult to assess using contour overlays. The new method only found a significant difference in one taxon, an expected difference as members of that taxon were absent from most sites in one survey.